Vortex and quick spin 96 tubes and load into a 96-position tube rack.
Label Tube Rack 4Initials# (First Plate from Abby Hoffman: 4AH1
Use the 50 ml Integra expandable spacing pipette to transfer 30 ul from each tube into a transparent pcr plate. Label this plate the same as the tube rack.
Vortex and spin control oligo pool (16S and ITS coligo 0.01 pg/ul each AND 16S SG_GR and ITS SG_GR 0.03 pg/ul each. This should be in the left hand refrigerator. Send me a picture of the label to be certain. It should be the only plate in their marked 0.01 pg/ul coligo and 0.03 pg/ul synthgene.
Add 6 ul control oligo plate to the sample aliquot plate in a well to well fashion (A1 to A1, B1 to B1, . . .) This can be done using an 8 channel or the 96 channel. If you use the 8 channel, you can reuse the dome caps on the control plate as long as you avoid contamination. Return control plate.
Seal, vortex, and spin aliquot plate.
Check concentration on Synergy HTX and save file on petalibrary. Make a new folder under DNA Quantification labeled “NovaSeq4”
General
Content
Integrations