Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

Plates in red have been extracted, PCRed, cleaned, quantified, and normalized by 7-15-22. Bolded red have been qPCRed.

NS6 Plates

6AC1

6AC2

6AC3

6BM1

6BM2

6LVD1

6LVD2

6LVD3

6LVD4

6RD1

6RD2

6RD3

6GTL1

6GTL2

6RD4

6RD5

6RD6

6RD7

6LVD5

6LVD6

MP002

MP003

MP006

Current total number of plates for ITS/16S PCR: 20 + 1 plate repeat (sm19-fire)

MasterMix (make for 16 plates in 50mL conical tube)

ul/rxn

Reagent

# of rxns

ul needed

3

5X Kapa HiFi Buffer

1700

5100

0.45

10M dNTPs

1700

765

0.3

Kapa HiFi HotStart DNA Pol

1700

510

7.25

HPLC H2O

1700

12325

11

Total Volume

1700

18700

  • Add 11 ul to each well of a hard shell, full skirt plate. Seal with bubble strips and store in refrigerator until needed label “NS5 PCR”. (If doing manually, one needs 2 ul of template and 2 ul of the primers).

Plate

16S Primer

ITS Primer

6AC1

16S0A1

ITS0A1

16S0B1

ITS0B1

6AC2

16S0C1

ITS0C1

16S0D1

ITS0D1

6AC3

16S0E1

ITS0E1

16S0F1

ITS0F1

6BM1

16S0G1

ITS0G1

16S0H1

ITS0H1

Run on Thermocycler Program GSAF36:

Temp C

Cycles

Time

95*

1X

3:00*

98

36X

0:30

62

36X

0:30

72

36X

0:30

72

1X

5:00

4

1X

0:00

MagBead Cleanup:

Some plates were cleaned up using the Nimbus platform protocol “AxyPrep MagBead PCR1 No MM”

Manually, it was done:

  • Equilibrate Beads to room Temperature

  • Add 24 ul of MagBeads to each well and 15 ul of replicate to same well of replicate

  • Pipette mix up and down 10 times.

  • Incubate at RT for 5 minutes

  • Secure plate on magnet plate; incubate at RT for 5 minutes (until wells are clear)

  • Remove 65 ul from each well; keep tips to left or right depending on the column to avoid bead pellet.

  • Add 100 ul Fresh 80% EtOH to each well. Incubate 30 seconds. Remove 100 ul from each well

  • Add 100 ul Fresh 80% EtOH to each well. Incubate 30 seconds. Remove 100 ul from each well

  • Reaspirate from each well to assure maximum EtOH removal

  • Allow plate to air dry for 7 minutes.

  • Remove sample plate from magnet plate.

  • Add 40 ul TE; pipette mix 10+ times. Incubate 2 minutes at RT.

  • Place sample plate back on magnet for 5 minutes or until all wells are cleared.

  • Transfer 40 ul to labeled transparent plate (Plate name_PCR_MIDs)

  • Store in -20 until ready to qPCR

MasterMix (make for 16 plates in 50mL conical tube)

ul/rxn

Reagent

# of rxns

ul needed

3

5X Kapa HiFi Buffer

1700

5100

0.45

10M dNTPs

1700

765

0.3

Kapa HiFi HotStart DNA Pol

1700

510

7.25

HPLC H2O

1700

12325

11

Total Volume

1700

18700

  • Add 11 ul to each well of a hard shell, full skirt plate. Seal with bubble strips and store in refrigerator until needed labeled “NS5 PCR”. (If doing manually, one needs 2 ul of template and 2 ul of the primers).

Plate

16S Primer

ITS Primer

6BM2

16S0A2

ITS0A2

6LVD1

16S0C2

ITS0C2

16S0D2

ITS0D2

6LVD2

16S0E2

ITS0E2

16S0F2

ITS0F2

6LVD3

16S0G2

ITS0G2

16S0H2

ITS0H2

Run on Thermocycler Program GSAF36:

Temp C

Cycles

Time

95*

1X

3:00*

98

36X

0:30

62

36X

0:30

72

36X

0:30

72

1X

5:00

4

1X

0:00

MagBead Cleanup:

Some plates were cleaned up using the Nimbus platform protocol “AxyPrep MagBead PCR1 No MM”

Manually, it was done:

  • Equilibrate Beads to room Temperature

  • Add 24 ul of MagBeads to each well and 15 ul of replicate to same well of replicate

  • Pipette mix up and down 10 times.

  • Incubate at RT for 5 minutes

  • Secure plate on magnet plate; incubate at RT for 5 minutes (until wells are clear)

  • Remove 65 ul from each well; keep tips to left or right depending on the column to avoid bead pellet.

  • Add 100 ul Fresh 80% EtOH to each well. Incubate 30 seconds. Remove 100 ul from each well

  • Add 100 ul Fresh 80% EtOH to each well. Incubate 30 seconds. Remove 100 ul from each well

  • Reaspirate from each well to assure maximum EtOH removal

  • Allow plate to air dry for 7 minutes.

  • Remove sample plate from magnet plate.

  • Add 40 ul TE; pipette mix 10+ times. Incubate 2 minutes at RT.

  • Place sample plate back on magnet for 5 minutes or until all wells are cleared.

  • Transfer 40 ul to labeled transparent plate (Plate name_PCR_MIDs)

  • Store in -20 until ready to qPCR.

MasterMix (make for 16 plates in 50mL conical tube)

ul/rxn

Reagent

# of rxns

ul needed

3

5X Kapa HiFi Buffer

1700

5100

0.45

10M dNTPs

1700

765

0.3

Kapa HiFi HotStart DNA Pol

1700

510

7.25

HPLC H2O

1700

12325

11

Total Volume

1700

18700

  • Add 11 ul to each well of a hard shell, full skirt plate. Seal with bubble strips and store in refrigerator until needed labeled “NS5 PCR”. (If doing manually, one needs 2 ul of template and 2 ul of the primers).

Plate

16S Primer

ITS Primer

6LVD4

16S0A3

ITS0A3

16S0B3

ITS0B3

6RD1

16S0C3

ITS0C3

16S0D3

ITS0D3

6RD2

16S0E3

ITS0E3

16S0F3

ITS0F3

6NW1

16S0G3

ITS0G3

16S0H3

ITS0H3

Run on Thermocycler Program GSAF36:

Temp C

Cycles

Time

95*

1X

3:00*

98

36X

0:30

62

36X

0:30

72

36X

0:30

72

1X

5:00

4

1X

0:00

MagBead Cleanup:

Some plates were cleaned up using the Nimbus platform protocol “AxyPrep MagBead PCR1 No MM”

Manually, it was done:

  • Equilibrate Beads to room Temperature

  • Add 24 ul of MagBeads to each well and 15 ul of replicate to same well of replicate

  • Pipette mix up and down 10 times.

  • Incubate at RT for 5 minutes

  • Secure plate on magnet plate; incubate at RT for 5 minutes (until wells are clear)

  • Remove 65 ul from each well; keep tips to left or right depending on the column to avoid bead pellet.

  • Add 100 ul Fresh 80% EtOH to each well. Incubate 30 seconds. Remove 100 ul from each well

  • Add 100 ul Fresh 80% EtOH to each well. Incubate 30 seconds. Remove 100 ul from each well

  • Reaspirate from each well to assure maximum EtOH removal

  • Allow plate to air dry for 7 minutes.

  • Remove sample plate from magnet plate.

  • Add 40 ul TE; pipette mix 10+ times. Incubate 2 minutes at RT.

  • Place sample plate back on magnet for 5 minutes or until all wells are cleared.

  • Transfer 40 ul to labeled transparent plate (Plate name_PCR_MIDs)

  • Store in -20 until ready to qPCR.

MasterMix (make for 16 plates in 50mL conical tube)

ul/rxn

Reagent

# of rxns

ul needed

3

5X Kapa HiFi Buffer

1700

5100

0.45

10M dNTPs

1700

765

0.3

Kapa HiFi HotStart DNA Pol

1700

510

7.25

HPLC H2O

1700

12325

11

Total Volume

1700

18700

  • Add 11 ul to each well of a hard shell, full skirt plate. Seal with bubble strips and store in refrigerator until needed labeled “NS5 PCR”. (If doing manually, one needs 2 ul of template and 2 ul of the primers).

Plate

16S Primer

ITS Primer

6NW2

16S0A4

ITS0A4

16S0B4

ITS0B4

6NW3

16S0C4

ITS0C4

16S0D4

ITS0D4

6NW4

16S0E4

ITS0E4

16S0F4

ITS0F4

6GTL1

16S0G4

ITS0G4

16S0H4

ITS0H4

6GTL2

16S0A5

ITS0A5

16S0B5

ITS0B5

Run on Thermocycler Program GSAF36:

Temp C

Cycles

Time

95*

1X

3:00*

98

36X

0:30

62

36X

0:30

72

36X

0:30

72

1X

5:00

4

1X

0:00

MagBead Cleanup:

Some plates were cleaned up using the Nimbus platform protocol “AxyPrep MagBead PCR1 No MM”

Manually, it was done:

  • Equilibrate Beads to room Temperature

  • Add 24 ul of MagBeads to each well and 15 ul of replicate to same well of replicate

  • Pipette mix up and down 10 times.

  • Incubate at RT for 5 minutes

  • Secure plate on magnet plate; incubate at RT for 5 minutes (until wells are clear)

  • Remove 65 ul from each well; keep tips to left or right depending on the column to avoid bead pellet.

  • Add 100 ul Fresh 80% EtOH to each well. Incubate 30 seconds. Remove 100 ul from each well

  • Add 100 ul Fresh 80% EtOH to each well. Incubate 30 seconds. Remove 100 ul from each well

  • Reaspirate from each well to assure maximum EtOH removal

  • Allow plate to air dry for 7 minutes.

  • Remove sample plate from magnet plate.

  • Add 40 ul TE; pipette mix 10+ times. Incubate 2 minutes at RT.

  • Place sample plate back on magnet for 5 minutes or until all wells are cleared.

  • Transfer 40 ul to labeled transparent plate (Plate name_PCR_MIDs)

  • Store in -20 until ready to qPCR.

qPCR NovaSeq6_Set1

  • Make 1:1000 dilutions of column 8 from the PCR plates by adding 1 ul to 999 ul TE in a deep well plate:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

NTC

NTC

NTC

B

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

0.0002 pM Std

0.0002 pM Std

0.0002 pM Std

C

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

0.002 pM Std

0.002 pM Std

0.002 pM Std

D

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

0.02 pM Std

0.02 pM Std

0.02 pM Std

E

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

0.2 pM Std

0.2 pM Std

0.2 pM Std

F

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

2 pM Std

2 pM Std

2 pM Std

G

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

20 pM Std

20 pM Std

20 pM Std

H

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

 

 

 

  • Add 16 ul of Illumina Library Quantification MasterMix to each well:

ul/rxn

Reagent

# of rxns

ul needed

10 ul

KAPA SYBR FAST qPCR MM (2X)

110

1100

2 ul

Primer Premix (10X)

110

220

4 ul

Ultra Pure Water

110

440

16 ul

Total Volume

110

1760

  • Add 4 ul of template, pool, or standards to each well:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

20 pM Std

20 pM Std

20 pM Std

B

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

2 pM Std

2 pM Std

2 pM Std

C

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

0.2 pM Std

0.2 pM Std

0.2 pM Std

D

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

0.02 pM Std

0.02 pM Std

0.02 pM Std

E

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

0.002 pM Std

0.002 pM Std

0.002 pM Std

F

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

0.0002 pM Std

0.0002 pM Std

0.0002 pM Std

G

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

NTC

NTC

NTC

H

2TRNL1_TRNL

2TRNL_16S

6AC1_16S

6AC1_ITS

6AC2_16S

6AC2_ITS

NTC

NTC

NTC

Results:

Plate Name

Average Result (nanomoles)

2TRNL1_TRNL

10.63

2TRNL_16S

6.02E-01

6AC1_16S

23.35

6AC1_ITS

36.97

6AC2_16S

67.91

6AC2_ITS

28.37

Full qPCR results below:

 

qPCR NovaSeq6_Set2

  • Make 1:1000 dilutions of column 8 from the PCR plates by adding 1 ul to 999 ul TE in a deep well plate:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

B

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

C

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

D

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

E

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

F

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

G

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

H

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

  • Add 16 ul of Illumina Library Quantification MasterMix to each well:

ul/rxn

Reagent

# of rxns

ul needed

10 ul

KAPA SYBR FAST qPCR MM (2X)

110

1100

2 ul

Primer Premix (10X)

110

220

4 ul

Ultra Pure Water

110

440

16 ul

Total Volume

110

1760

  • Add 4 ul of template, pool, or standards to each well:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

20 pM Std

20 pM Std

B

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

2 pM Std

2 pM Std

C

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

0.2 pM Std

0.2 pM Std

D

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

0.02 pM Std

0.02 pM Std

E

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

0.002 pM Std

0.002 pM Std

F

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

0.0002 pM Std

0.0002 pM Std

G

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

NTC

NTC

H

6AC3_ITS

6AC3_16S

6RD1_ITS

6RD1_16S

6BM1_ITS

6BM1_16S

6LVD1_ITS

6LVD1_16S

6GTL1_ITS

6GTL1_16S

NTC

NTC

Results:

Plate Name

Average Result (nanomoles)

6AC3_ITS

4.125

6AC3_16S

7.46

6RD1_ITS

10.152

6RD1_16S

15.709

6BM1_ITS

7.874

6BM1_16S

4.842

6LVD1_ITS

4.532

6LVD1_16S

8.102

6GTL1_ITS

5.992

6GTL1_16S

Needs to be redone

Full qPCR results below:

qPCR NovaSeq6_Set3

  • Make 1:1000 dilutions of column 8 from the PCR plates by adding 1 ul to 999 ul TE in a deep well plate:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

 

NTC

B

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

04.0002 pM Std

0.0002 pM Std

C

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

0.002 pM Std

0.002 pM Std

D

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

0.02 pM Std

0.02 pM Std

E

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

0.2 pM Std

0.2 pM Std

F

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

2 pM Std

2 pM Std

G

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

20 pM Std

20 pM Std

H

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

 

 

  • Add 16 ul of Illumina Library Quantification MasterMix to each well:

ul/rxn

Reagent

# of rxns

ul needed

10 ul

KAPA SYBR FAST qPCR MM (2X)

110

1100

2 ul

Primer Premix (10X)

110

220

4 ul

Ultra Pure Water

110

440

16 ul

Total Volume

110

1760

  • Add 4 ul of template, pool, or standards to each well:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

20 pM Std

20 pM Std

B

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

2 pM Std

2 pM Std

C

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

0.2 pM Std

0.2 pM Std

D

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

0.02 pM Std

0.02 pM Std

E

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

0.002 pM Std

0.002 pM Std

F

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

0.0002 pM Std

0.0002 pM Std

G

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

NTC

NTC

H

6LVD2_ITS

6LVD2_16S

2TRNL3_16S

2TRNL3_TRNL

2TRNL2_TRNL

2TRNL2_16S

6RD2_16S

6RD2_ITS

6GTL1_16S

2TRNL1_16S_2

NTC

NTC

Results:

Plate Name

Average Result (nanomoles)

6LVD2_ITS

16.09

6LVD2_16S

21.71

2TRNL3_16S

42.69

2TRNL3_TRNL

8.68

2TRNL2_TRNL

7.51

2TRNL2_16S

36.27

6RD2_16S

28.48

6RD2_ITS

29.45

6GTL1_16S

8.2

2TRNL1_16S_2

32.72

Full qPCR results below:

qPCR NovaSeq6_Set4

  • Make 1:1000 dilutions of column 3 from the PCR plates by adding 1 ul to 999 ul TE in a deep well plate:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

 

 

NTC

B

 

04.0002 pM Std

0.0002 pM Std

C

 

0.002 pM Std

0.002 pM Std

D

 

0.02 pM Std

0.02 pM Std

E

 

0.2 pM Std

0.2 pM Std

F

 

2 pM Std

2 pM Std

G

 

20 pM Std

20 pM Std

H

 

 

 

  • Add 16 ul of Illumina Library Quantification MasterMix to each well:

ul/rxn

Reagent

# of rxns

ul needed

10 ul

KAPA SYBR FAST qPCR MM (2X)

110

1100

2 ul

Primer Premix (10X)

110

220

4 ul

Ultra Pure Water

110

440

16 ul

Total Volume

110

1760

  • Add 4 ul of template, pool, or standards to each well:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

NTC

NTC

NTC

B

0.0002 pM Std

0.0002 pM Std

0.0002 pM Std

C

0.002 pM Std

0.002 pM Std

0.002 pM Std

D

0.02 pM Std

0.02 pM Std

0.02 pM Std

E

0.2 pM Std

0.2 pM Std

0.2 pM Std

F

2 pM Std

2 pM Std

2 pM Std

G

20 pM Std

20 pM Std

20 pM Std

H

 

 

 

Results:

Plate Name

Average Result (nanomoles)

Full qPCR results below:

qPCR NovaSeq6_Set5

  • Make 1:1000 dilutions of column 3 from the PCR plates by adding 1 ul to 999 ul TE in a deep well plate:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

 

 

NTC

B

 

04.0002 pM Std

0.0002 pM Std

C

 

0.002 pM Std

0.002 pM Std

D

 

0.02 pM Std

0.02 pM Std

E

 

0.2 pM Std

0.2 pM Std

F

 

2 pM Std

2 pM Std

G

 

20 pM Std

20 pM Std

H

 

 

 

Add 16 ul of Illumina Library Quantification MasterMix to each well:

ul/rxn

Reagent

# of rxns

ul needed

10 ul

KAPA SYBR FAST qPCR MM (2X)

110

1100

2 ul

Primer Premix (10X)

110

220

4 ul

Ultra Pure Water

110

440

16 ul

Total Volume

110

1760

  • Add 4 ul of template, pool, or standards to each well:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

NTC

NTC

NTC

B

0.0002 pM Std

0.0002 pM Std

0.0002 pM Std

C

0.002 pM Std

0.002 pM Std

0.002 pM Std

D

0.02 pM Std

0.02 pM Std

0.02 pM Std

E

0.2 pM Std

0.2 pM Std

0.2 pM Std

F

2 pM Std

2 pM Std

2 pM Std

G

20 pM Std

20 pM Std

20 pM Std

H

 

 

 

Results:

Plate Name

Average Result (nanomoles)

Full qPCR results below:

qPCR NovaSeq6_Set6

  • Make 1:1000 dilutions of column 3 from the PCR plates by adding 1 ul to 999 ul TE in a deep well plate:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

 

 

NTC

B

 

04.0002 pM Std

0.0002 pM Std

C

 

0.002 pM Std

0.002 pM Std

D

 

0.02 pM Std

0.02 pM Std

E

 

0.2 pM Std

0.2 pM Std

F

 

2 pM Std

2 pM Std

G

 

20 pM Std

20 pM Std

H

 

 

 

  • Add 16 ul of Illumina Library Quantification MasterMix to each well:

ul/rxn

Reagent

# of rxns

ul needed

10 ul

KAPA SYBR FAST qPCR MM (2X)

110

1100

2 ul

Primer Premix (10X)

110

220

4 ul

Ultra Pure Water

110

440

16 ul

Total Volume

110

1760

  • Add 4 ul of template, pool, or standards to each well:

 

1

2

3

4

5

6

7

8

9

10

11

12

A

NTC

NTC

NTC

B

0.0002 pM Std

0.0002 pM Std

0.0002 pM Std

C

0.002 pM Std

0.002 pM Std

0.002 pM Std

D

0.02 pM Std

0.02 pM Std

0.02 pM Std

E

0.2 pM Std

0.2 pM Std

0.2 pM Std

F

2 pM Std

2 pM Std

2 pM Std

G

20 pM Std

20 pM Std

20 pM Std

H

 

 

 

Results:

Plate Name

Average Result (nanomoles)

Full qPCR results below:

  • No labels