TRNL & 16S Library Prep

PCR MasterMix (20 Plates)

• Add 11 ul to each well of a hard shell, full skirt plate. Add 2 uL of primers and 2uL of template to each well.

Template Format:

Run on thermocycler program TRNL_T*:

MagBead Cleanup:

• Equilibrate Beads to room Temperature

• Add 15uL of ultra pure water to each well.

• Add 24 ul of MagBeads to each well.

• Pipette mix up and down 10 times.

• Incubate at RT for 5 minutes

• Secure plate on magnet plate; incubate at RT for 5 minutes (until wells are clear)

• Remove 65 ul from each well; keep tips to left or right depending on the column to avoid bead pellet.

• Add 100 ul Fresh 80% EtOH to each well. Incubate 30 seconds. Remove 100 ul from each well

• Add 100 ul Fresh 80% EtOH to each well. Incubate 30 seconds. Remove 100 ul from each well

• Reaspirate from each well to assure maximum EtOH removal

• Allow plate to air dry for 7 minutes.

• Remove sample plate from magnet plate.

• Add 40 ul TE; pipette mix 10+ times. Incubate 2 minutes at RT.

• Place sample plate back on magnet for 5 minutes or until all wells are cleared.

• Transfer 40 ul to labeled transparent plate (Plate name_PCR_MIDs)

qPCR

• Make 1:1000 dilutions of wells B3 & H6 from the PCR plate by adding 1 ul to 999 ul TE in a deep well plate:

• Add 16 ul of Illumina Library Quantification MasterMix to each well:

• Add 4 ul of template, pool, or standards to each well:

Results:

Average results for each plate are displayed below:

TRNL_1_2_T: 6.57 nanomoles

TRNL_1_2_16S: 79.85 nanomoles

TRNL_1_3_T: 14.2 nanomoles

TRNL_1_3_16S: 54.15 nanomoles

TRNL_1_4_T: 11.93 nanomoles

TRNL_1_4_16S: 26.46 nanomoles

TRNL_1_5_T: 15.02 nanomoles

TRNL_1_5_16S: 44.21 nanomoles

TRNL_1_6_T: 13.19 nanomoles

TRNL_1_6_16S: 55.93 nanomoles

*TRNL_T_Pool: 3.02 nanomoles

*TRNL_16S_Pool: 12.23 nanomoles

Result report below:

Open

*Result report for TRNL pools below:

Open